Series Machinarum Turris Instrumentorum
Parametrus technicus
| Parametrus technicus | Unitas | TCK-42DW | TCK-52DW | TCK-75DW |
| Diameter conversionis lecti machinae maximus | mm | Quadringenti | ∅560 | ∅550 |
| Longitudo maxima machinationis | mm | 350 | quingenti | DCC |
| Diameter maximus machinationis (typus disci) | mm | ∅360 | ∅450 | ∅500 |
| Diameter rotationis in paletta | mm | ∅170 | ∅210 | ∅280 |
| Diameter fusi per foramen | mm | ∅56 | ∅66 | ∅93 |
| Diameter vectis maximus | mm | ∅42 | ∅52 | ∅75 |
| Celeritas rotationis fusi | rpm | 4500 | 4200 | 2600 |
| Genus capitis fusi | ASA | A2-5(6") | A2-5(8") | A2-5 (10") |
| Potentia motoris fusi | Kw | 7.5 (servo) | 11 (servus) | 15 (servus) |
| Structura lecti machinalis (lectus inclinatus) | typus | Fusio arenae resinae | Fusio arenae resinae | Fusio arenae resinae |
| Typus ferriviae ductoriae | typus | Ferrivia dux linearis | Ferrivia dux linearis | Ferrivia dux linearis |
| Typus turris | typus | Stationes hydraulicae/servomotoriae octo | Hydraulica/Servo duodecim stationes | Hydraulica/Servo duodecim stationes |
| Specificatio tenendi instrumenti quadrati | mm | 20 | 20 | 20 |
| Specificatio tenendi instrumenti perforandi | mm | 25 | 25 | 25 |
| Distantia apicis mandrini | mm | 370 | 550 | DCCXC |
| Iter manicae, attenuatio manicae | mm | 80/Mors4 | 80/Mors4 | 80/Mors4 |
| Cursus fusi caudalis (hydraulicus) | mm | ducenti | 450 | DCCCL |
| Potentia motoris X/Z | Kw | 2.4 | 2.4 | 2.4 |
| Iter X | mm | ducenti | 225 | 320 |
| Iter Z | mm | quadringenti | DCX | DCCCL |
| Celeritas motus rapidi X/Z | m/min | 24 | 24 | 24 |
| Accuratio repetitionis X/Z | mm | ±0.003 | ±0.003 | ±0.003 |
| Accuratio machinationis | GB | It6 | It6 | It6 |
| Asperitas superficiei | um | Ra ≤ 0.8 | Ra ≤ 0.8 | Ra ≤ 0.8 |
| Pondus | KG | 3300 | 3500 | 3600 |
| Magnitudo machinae (L × L × A) | mm | 2350×1720×1805 | 2600×1800×1860 | 2600×1800×1860 |
Nuntium tuum hic scribe et nobis mitte.
